Resolution 704 x 576

Thermal IP Bullet Camera

NVIP-H-8001/T

Key features
  • Lens: thermal, f=8 mm/F1.0
  • Video content analysis
  • SD card support
  • Temperature Measurment
  • Temperature Alarm
  • Ability to observe in total darkness
Functions
Functionalities
Thermovision

The thermal image is created based on thermal radiation emitted by objects. Thanks to this, thermal imaging cameras allow effective observation even in total darkness and during adverse weather conditions such as fog, where standard cameras, even those equipped with an IR illuminator, do not work. In addition, thermal imaging cameras have been equipped with image analysis functions thanks to which the detection efficiency of objects is very high.

NMS Compatible

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.

The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.

ONVIF standard

The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265+

Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

Temperature alarm

This function allows to trigger an alarm after detecting exceeding a set temperature threshold in a specific zone, point or on a defined line. Possible alarm responses are: local alarm, alarm in Novus Management System VSS, e-mail, save to FTP, save to SD card, activation of the alarm output.

Temperature measurement

This function allows the temperature of objects to be measured at a selected point/area of the observed scene.

Image - Thermal Module
Image Sensor

Uncooled FPA Microbolometer

Number of Effective Pixels

400 (H) x 300 (V)

Pixel Size

17 µm

Spectral Range

8 - 14 µm

Thermal Sensitivity

40 mK

Thermovision Modes

White Hot, Black Hot, Rainbow, Ironbow, HSV, Autumn, Bone, Cool, Copper, Fire Hot, Pink, Spring, Summer, Winter, Jet, Flame, Rosebengal

Detection Temperature

-40°C ~ 150°C

Lens - Thermal Module
Lens Type

fixed focal length, f=8 mm/F1.0

Object Detection Range

235m - human , 722m - vehicle

Object Recognition Range

59m - human , 180m - vehicle

Image
Digital Noise Reduction (DNR)

2D, 3D

Defog Function (F-DNR)

yes

Network
Stream Resolution

704 x 576, 704 x 480, 352 x 288 (CIF), 352 x 240

Frame Rate

25 fps for 704 x 576,

30 fps for 704 x 480 and lower resolutions

Multistreaming Mode

2 streams

Video/Audio Compression

H.264, H.264 Smart, H.265, H.265 Smart, MJPEG/G.711, RAW_PCM

Number of Simultaneous Connections

max. 8

Bandwidth

15 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4/v6, UDP, HTTPS, FTP, DHCP, DNS, RTSP, RTP, PPPoE, SMTP, RTCP, Unicast

Camera Configuration

from Internet Explorer browser

languages: Polish, English, Russian, and others

Compatible Software

NOVUS MANAGEMENT SYSTEM VSS

Other functions
Temperature Measurement

yes

Temperature Alarm

yes

Temperature Measurement Zones

19 polygon, line, point

Privacy Zones

5

Motion Detection

yes

Video Content Analysis (VCA)

abandoned object, object disappearance, line cross, zone entrance, double line cross

Image Processing

180˚ image rotation, mirror effect

Prealarm/Postalarm

up to 5 MB/up to 86400 s

System Reaction to Alarm Events

e-mail, saving file on FTP server, saving file on SD card, alarm output activation

Interfaces
Video Output

BNC, 1.0 Vp-p, 75 Ohm - maintenance only

Audio Input/Output

1 x RCA/1 x RCA

Alarm Input/Output

2 (NO/NC)/2

RS-485

yes

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Memory Card Slot

SD - capacity up to 128GB

Installation parameters
Dimensions (mm)

with bracket: 110 (Ф) x 388 (L)

Weight

1.9 kg

Degree of Protection

IP 66 (details in the user’s manual)

Enclosure

aluminium, white, fully cable managed wall mount bracket in-set included

Power Supply

12 VDC, PoE (IEEE 802.3af, Class 3)

Surge protection

TVS 4000 V

Power Consumption

6 W

Operating Temperature

-40°C ~ 60°C

Humidity

max. 90%, relative (non-condensing)

The above data applies to cameras with firmware v3.6.0825.1004.89.0.29.3.4