Supports HD analog cameras (720p, 1080p, 4Mpx, 5Mpx)

Multistandard AHD Recorder

NHDR-6016-H1-II

Key features
  • Video channels: 16, audio channels: 1
  • Recording speed: up to 480 fps (AHD), up to 480 fps (IP)
  • Internal HDDs mount: up to 1
  • Monitor outputs: 3 (2 x main, 1 x spot)
  • Supports high resolution analog cameras (1080p, 4MPX, 5MPX)
  • Supports AHD, TVI, CVI cameras
  • IP cameras support (hybrid mode)
  • Intelligent image analysis
Compatibility
Functions
Functionalities
HTML5 standard support

The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.

Configuration of cameras from the NVR

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

Dynamic change of stream parameters

The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording

Smart Playback

Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.

NMS Compatible

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.

The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.

ONVIF standard

The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

N-VID6 application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Video
Video Input

16 x BNC

Operating mode

AHD 5Mpx, TVI 5Mpx, CVI 5Mpx

Monitor Output

main (split screen, full screen, sequence): 1 x HDMI (FullHD), 1 x VGA (FullHD), 1 x BNC,

spot: 1 x BNC interchangeably to main output

IP Streams

hybrid mode: 16 x BNC + 8 x IP

IP mode: 8 x BNC + 16 x IP

Supported IP resolution

max. 2592 x 1944

Audio
Audio Input/Output

1 x RCA (Line-in)/1 x HDMI, 1 x RCA

Recording
Compression

H.264, H.265

Recording Speed

480 fps (960 x 1080 - 1080p Lite)

240 fps (1920 x 1080 - FullHD)

240 fps (1280 x 1440 - 4Mpx Lite)

160 fps (1280 x 1944 - 5Mpx Lite)

IP recording speed

hybrid mode: 240fps

IP mode: 480fps

IP stream size

hybrid mode: 32 Mb/s in total from all IP cameras

IP mode: 64 Mb/s in total from all IP cameras

Recording Mode

continuous, triggered by: REC/PANIC button, alarm input, motion detection, image analysis

Schedule

individual settings for: each camera, each day of the week, configuration with an accuracy of: 1 min, possibility of combining individual recording modes

Prealarm/postalarm

up to 5 s/up to 10 min

Playback
Playback speed

480 fps

IP playback speed

480 fps

Recorded Data Search

by date/time, events, image analysis events, motion in a defined area, tags

Backup
Backup Methods

USB port (HDD or Flash memory), network

Backup File Format

AVI, RPAS (player included)

Storage
Internal storage

available mount: 1 x HDD 3.5” SATA

Total Internal Capacity

8 TB

Alarm
IP Camera Alarm Input/Output

supports IP camera’s alarm input/output

Motion Detection

18 x 22 grid, individual settings of sensitivity

System Reaction to Alarm Events

buzzer, e-mail, recording activation, PTZ, Full Screen

Intelligent image analysis
Supported functions for analog cameras

Line cross, Zone entrance

Supported functions for IP cameras

Exception, Line cross, Zone entrance, Abandoned object, Object disappearance

Network
Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Network Protocols Support

HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, PPPoE, SMTP, P2P, POS, HTML5

PC/MAC Software

NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC, NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000

Mobile applications

N-VID6 (iPhone, Android)

Number of Simultaneous Connections

up to 8 (live monitoring: 8, playback: 8, configuration: 8) , live monitoring up to 28 mainstreams, 96 substreams, playback up to 8 streams

Bandwidth

80 Mb/s in total to all client workstations

PTZ
PTZ Ports

1 x RS-485

PTZ Protocols

Pelco-D, Pelco-P

PTZ Functions

pan/tilt/zoom, preset commands, patterns

COAX
COAX Functions

menu, zoom, focus, PTZ

Auxiliary Interfaces
USB Ports

2 x USB 2.0

Operating system
Operating System

Linux

OSD

languages: Polish, English, Russian, others

Control

IR remote controller, PC mouse (in-set included), network

System Diagnostic

automatic control of: HDDs, camera connection loss

Security

password protection, IP filtering

Installation parameters
Dimensions (mm)

255 (W) x 42 (H) x 234 (D)

Weight

0.89 kg (without HDD)

Power Supply

12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included)

Power Consumption

20 W (with 1 HDD)

Operating Temperature

-10°C ~ 50°C

The recorder is dedicated to work with AHD cameras, Novus 3000 and 6000 series IP cameras and achieves the best functionality with them. In case of work with IP cameras intelligent image analysis, dualstream mode, PTZ control, motion detection and alarm inputs / outputs functions depend on the functionality of the IP camera and the capabilities of the communication protocol. Detailed data on camera compatibility with recorders and compatible hard drives can be found in the compatibility tables available in the DOWNLOADABLE FILES tab.
Display and playback speeds are achieved using dual stream.
The recording speed of analog cameras may be limited during playback.