Professional system for remote body temperature measurement with mask detection function
IP Motor-zoom Camera with video content analysis based on Deep Learning
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- face recognition
The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
- counting the number of visitors to the selected store depending on days / week
The function allows to trigger a local alarm, send an e-mail, activate the relay after detecting the formation of people's communities from the observed scene. The function can be used in city monitoring.
- monitoring public space, including markets, squares
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
- passage control (gates, tripods)
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
up to 8 channels at 3840 x 2160 resolution (video + audio)
|Maximum Supported Camera Resolution|
3840 x 2160
H.264, H.264+, H.265
main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)
1 x line-out (RCA) 1 x HDMI
240 fps (8 x 30 fps for 3840 x 2160 and lower)
80 Mb/s in total from all cameras
time-lapse, triggered by: manual, motion detection
up to 5 s/up to 600 s
240 fps (8 x 30 fps)
240 fps (8 x 30 fps)
|Recorded Data Search|
by date/time, events
USB port (HDD or Flash memory), network
|Backup File Format|
AVI, RPAS (player included)
available mount: 1 x HDD 3.5” 10 TB SATA
|Total Internal Capacity|
|Camera Alarm Input/Output|
supports camera’s alarm input/output
supports camera’s motion detection
|System Reaction to Alarm Events|
buzzer, recording activation, PTZ, e-mail with atatchment
|Intelligent image analysis|
Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Multi Loiter, Face Detection, Face Recognition, People Counting, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle
1 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s
8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s
|Network Protocols Support|
HTTP, TCP/IP, IPv4, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, SMTP
|ONVIF Protocol Support|
Profile S (ONVIF 2.2 or higher)
NMS, Internet Explorer, NVR-6000 Viewer, N Control 6000/NVR-6000 Viewer
SuperLive Plus (iPhone, Android)
|Number of Simultaneous Connections|
up to 2 clients, up to 5 main streams or 12 substreams or 8 playback streams in total
80 Mb/s in total to all client workstations
pan/tilt/zoom, preset commands
2 x USB 2.0,
languages: Polish, English, others
IR remote controller, PC mouse (in-set included), network
automatic control of: HDDs, network, camera connection loss
password protection, IP filtering, MAC filtering
300 (W) x 52 (H) x 248 (D)
1.16 kg (without HDD)
100 ~ 240 VAC
20 W (with 1 HDD) + 100 W PoE
-10°C ~ 50°C
|NVR6000 rekomendacja bezpieczeństwa.pdf||Installation and Maintenance Manual||
|NVR-6000_series_FULL_EN_PL_v1.2(up to 1.3.4).pdf||User manual||
|N Control 6000 x64 Ver2.1.1.01026.exe.zip||Software||
|N Control 6000_ver2.1.1.00831.pkg_.zip||Software||