The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)
The mobile application allows for remote monitoring of a system based on 6000 (old 3000) series cameras, via a smartphone with Android or iOS. Basic camera configuration as well as PTZ control are available from the phone. Connection of the camera with the application does not require the use of a recorder (local network, port forwarding)
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
The IK scale is used to determine the degree of protection against equipment impact, including camera casings used in monitoring. The highest level of IK scale is "IK10" means that the camera is resistant to impacts with a strength of 20J, which translates into the equivalent of the fall of the object weighing 5kg from a height of 40cm.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object
Image | |
---|---|
Image Sensor | 5 MPX CMOS sensor 1/2.7” SmartSens |
Number of Effective Pixels | 2608 (H) x 1960 (V) |
Min. Illumination | 0.02 lx/F1.85 - color mode, 0 lx (IR on) - B/W mode |
Electronic Shutter | auto/manual: 1/2 s ~ 1/100000 s |
Digital Slow Shutter (DSS) | up to 1/2 s |
Wide Dynamic Range (WDR) | yes |
Digital Noise Reduction (DNR) | 2D, 3D |
Defog Function (F-DNR) | yes |
Highlight Compensation (HLC) | yes |
Back Light Compensation (BLC) | yes |
Reduction of image flicker (Antiflicker) | yes |
Lens | |
Lens Type | fixed focal, f=2.8 mm/F1.85 |
Day/Night | |
Switching Type | mechanical IR cut filter |
Switching Mode | auto, manual, time |
Switching Level Adjustment | yes |
Switching Delay | 2 ~ 120 s |
Switching Schedule | yes |
Visible Light Sensor | yes |
Network | |
Stream Resolution | 2592 x 1944, 2560 x 1440 (QHD), 1920 x 1080 (Full HD), 1280 x 720 (HD), 640 x 480 (VGA), 480 x 240, 320 x 240 (QVGA) |
Frame Rate | 20 fps for 2592 x 1944, 30 fps for 2560 x 1440 (QHD) and lower resolutions |
Multistreaming Mode | 3 streams |
Video/Audio Compression | H.264, H.265/G.711 |
Number of Simultaneous Connections | max. 4 |
Bandwidth | 12 Mb/s in total |
Network Protocols Support | HTTP, TCP/IP, IPv4, IPv4/v6, UDP, HTTPS, Multicast, FTP, DHCP, DDNS, NTP, RTSP, UPnP, QoS/DSCP, IEEE 802.1X, PPPoE, SMTP, SSL, ICMP, Unicast |
ONVIF Protocol Support | Profile S |
Camera Configuration | from Internet Explorer browser languages: Polish, English, Russian, and others |
Compatible Software | NMS, NVR-6000 Viewer |
Mobile applications | SuperLive Plus (iPhone, Android) |
Other functions | |
Privacy Zones | 4 video mask type: single color |
Motion Detection | yes |
Region of interest (ROI) | 3 |
Video Content Analysis (VCA) | tamper, abandoned object, object disappearance, line cross, zone entrance, Scene Change, Video Color Cast |
Image Processing | 180˚ image rotation, sharpening, mirror effect, vertical flip, horizontal flip |
Prealarm/Postalarm | -/up to 120 s |
System Reaction to Alarm Events | e-mail, e-mail with attachment, saving file on FTP server |
Restoring default settings | via web browser, via NMS IPTool software |
IR LED | |
LED Number | 1 |
Range | 30 m |
Angle | 120° |
Interfaces | |
Audio Input/Output | -/- built-in microphone |
Network Interface | 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s |
Installation parameters | |
Dimensions (mm) | 95 (Ф) x 83 (H) |
Weight | 0.5 kg |
Degree of Protection | IP 67 (details in the user’s manual) |
Enclosure | vandalproof IK10 impact rating aluminium, white |
Power Supply | PoE, 12 VDC |
Surge protection | TVS 4000 V |
Power Consumption | 3 W, 6 W (IR on) |
Operating Temperature | -30°C ~ 60°C |
Humidity | max. 95%, relative (non-condensing) |