Classic IP Camera
Speed Dome IP Camera
Professional system for remote body temperature measurement
The mobile application allows for remote monitoring of a system based on 6000 (old 3000) series cameras, via a smartphone with Android or iOS. Basic camera configuration as well as PTZ control are available from the phone. Connection of the camera with the application does not require the use of a recorder.
Lens with the possibility of remote focal and focus adjustment using a recorder, web browser, NMS software or even a mobile application.
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
The IK scale is used to determine the degree of protection against equipment impact, including camera casings used in monitoring. The highest level of IK scale is "IK10" means that the camera is resistant to impacts with a strength of 20J, which translates into the equivalent of the fall of the object weighing 5kg from a height of 40cm.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
5 MPX CMOS sensor 1/2.7” SmartSens
|Number of Effective Pixels|
2608 (H) x 1960 (V)
0.01 lx/F1.4 - color mode,
0 lx (IR on) - B/W mode
auto/manual: 1/2 s ~ 1/100000 s
|Digital Slow Shutter (DSS)|
up to 1/2 s
|Wide Dynamic Range (WDR)|
|Digital Noise Reduction (DNR)|
|Defog Function (F-DNR)|
|Highlight Compensation (HLC)|
|Back Light Compensation (BLC)|
|Reduction of image flicker (Antiflicker)|
motor-zoom, f=2.8 ~ 12 mm/F1.4
zoom trigger, day/night mode trigger, manual trigger
mechanical IR cut filter
auto, manual, time
|Switching Level Adjustment|
2 ~ 120 s
|Visible Light Sensor|
2592 x 1944, 2560 x 1440 (QHD), 1920 x 1080 (Full HD), 1280 x 720 (HD), 640 x 480 (VGA), 480 x 240, 320 x 240 (QVGA)
20 fps for 2592 x 1944,
30 fps for 2560 x 1440 (QHD) and lower resolutions
|Number of Simultaneous Connections|
12 Mb/s in total
|Network Protocols Support|
HTTP, TCP/IP, IPv4, IPv4/v6, UDP, HTTPS, Multicast, FTP, DHCP, DDNS, NTP, RTSP, UPnP, QoS/DSCP, IEEE 802.1X, PPPoE, SMTP, SSL, ICMP, Unicast
|ONVIF Protocol Support|
from Internet Explorer browser
languages: Polish, English, Russian, and others
NMS, NVR-6000 Viewer
SuperLive Plus (iPhone, Android)
4 video mask type: single color
|Region of interest (ROI)|
|Video Content Analysis (VCA)|
tamper, abandoned object, object disappearance, line cross, zone entrance, Scene Change, Video Color Cast
180˚ image rotation, sharpening, mirror effect, vertical flip, horizontal flip
-/up to 120 s
|System Reaction to Alarm Events|
e-mail, e-mail with attachment, saving file on FTP server
|Restoring default settings|
via web browser, via NMS IPTool software
-/- built-in microphone
1 x Ethernet - RJ-45 interface, 10/100 Mbit/s
112 (Ф) x 100 (H)
|Degree of Protection|
IP 67 (details in the user’s manual)
vandalproof IK10 impact rating aluminium, white
PoE, 12 VDC
TVS 4000 V
10 W (IR on)
-30°C ~ 60°C
max. 95%, relative (non-condensing)
|Accessories Compatibility Tables_Tabele kompatybilnosci akcesoriow 02.07.2020.xlsx||Compatibility table||
|VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdf||Others||