• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

IR LED, range up to 10 m



Cube IP camera

NVIP-2Q-4201/PIR/W

Key features
  • Resolution: 2 MPX
  • access to the camera via the Internet thanks to P2P connectivity
  • Lens: fixed focal, f=2.8 mm/F1.85
  • D/N function - IR cut filter
  • reduction of false alarms - PIR detector
  • microSD card support
  • two-way audio
  • Min. Illumination: 0.1 lx (0 lx, IR on)
  • IR LED, range up to 10 m
Functions
Functionalities
Full camera configuration from NVR

The 4000 series recorders, in conjunction with the 4000 (former 2000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

RxCamView

The mobile application allows remote monitoring of a system based on 4000 (former 2000) series cameras supporting P2P functionality, via a smartphone with Android or iOS. Basic camera configuration as well as PTZ control are available from the phone. The application allows you to connect to cameras via P2P using the QR code, without the need for additional network configuration.

SD Card slot

The camera equipped with an SD card slot (up to 128GB) allows local recording of video material, so it is resistant to possible interference in the transmission of data between the camera and the recorder. Playback and export of saved material can be done from the level of the web browser.

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Image
Image Sensor

2 MPX CMOS sensor 1/2.7” Galaxycore

Number of Effective Pixels

1920 (H) x 1080 (V)

Min. Illumination

0.1 lx/F2.0 - color mode,

0 lx (IR on) - B/W mode

Electronic Shutter

auto/manual: 1/5 s ~ 1/200000 s

Digital Slow Shutter (DSS)

up to 1/5 s

Wide Dynamic Range (WDR)

yes

Digital Noise Reduction (DNR)

3D

Defog Function (F-DNR)

yes

Highlight Compensation (HLC)

yes

Back Light Compensation (BLC)

yes

Lens
Lens Type

fixed focal, f=2.8 mm/F1.85

Day/Night
Switching Type

mechanical IR cut filter

Switching Mode

auto, manual

Switching Delay

1 ~ 36 s

Switching Schedule

yes

Visible Light Sensor

yes

Network
Stream Resolution

1920 x 1080 (Full HD), 1280 x 960, 1280 x 720 (HD), 640 x 480 (VGA), 320 x 240 (QVGA)

Frame Rate

20 fps for each resolution

Multistreaming Mode

2 streams

Video/Audio Compression

H.264, H.265/G.711

Number of Simultaneous Connections

max. 4

Bandwidth

8 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4, DHCP, DNS, DDNS, NTP, RTSP, RTP, P2P

ONVIF Protocol Support

Profile S

Camera Configuration

from Internet Explorer browser

languages: Polish, English, Russian, and others

Compatible Software

NMS

Mobile applications

RxCamView (iPhone, Android)

WiFi
Network standard

IEEE802.11b, g, n

Band

2.4GHz

Security

WEP, WPA-PSK/WPA2-PSK

Transmission range

up to 50 m

Antenna

built-in, omnidirectional

Other functions
Privacy Zones

4

Motion Detection

yes

PIR detector

range up to 7 m

Audio Detection

yes

Image Processing

180˚ image rotation, vertical flip, horizontal flip

Prealarm/Postalarm

up to 5 s/up to 300 s

System Reaction to Alarm Events

saving file on SD card, alarm output activation

Determent

high power white LED, acoustic signaling device

Restoring default settings

via web browser, using reset button

IR LED
LED Number

12

Range

10 m

Angle

120°

Smart IR

yes (software support)

Interfaces
Audio Input/Output

built-in microphone/speaker

Alarm Input/Output

1 (NO/NC)/1 relay type

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Wireless (WiFi)

Memory Card Slot

microSD - capacity up to 128GB

Installation parameters
Dimensions (mm)

63 (W) x 106 (H) x 33 (L)

with bracket: 75 (W) x 120 (H) x 33 (L)

Weight

0.2 kg

Enclosure

plastic, black and white, wall mount/base in-set included

Power Supply

PoE, 12 VDC

Surge protection

TVS 4000 V

Power Consumption

2 W,

3 W (IR on)

Operating Temperature

-10°C ~ 45°C

Humidity

max. 95%, relative (non-condensing)

File name Description  
CE_2Q-4201_PIR_W_EN.pdf
Certificate
163.96 KB
NVIP-2Q-4201_PIR_W_EN_PL_v1.2.pdf
User manual
2.81 MB
IP2000_ 4000 cameras security recommendations_rekomendacje bezpieczenstwa_EN_PL_v1.0.pdfOthers

1005.7 KB
NVIP-4000_series_FULL_EN_PL_v1.3.pdfUser manual

7.45 MB
IP4000 series password generator with manual.zipSoftware

836.74 KB
Device Config Tool_1.0.1.56 with manual.zipSoftware

27.78 MB
NmsIPTool_3.4.exeSoftware

170.29 MB

See our channel on