The mobile application allows for remote monitoring of a system based on 4000, AHD and Wi-Fi recorders via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
4000 Series recorders are able to receive a message about the detection of a moving object by a PIR detector built into the front panel of the camera. A passive infrared detector allows us to eliminate false motion detections caused by eg:
- lights of passing cars
- shadow movements
- reflections from shiny surfaces
- leaves / trees movement in the wind
The principle of operation of the PIR detector is based on the detection of heat changes in the detection zone, therefore the alarm is generated only when a human or other object that differs in temperature from the environment appears on the stage.
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.
Transducers with a fisheye lens allow observation of the whole room with the help of one camera. Thanks to this type of lens, we avoid monitoring "dead zones" and save resources by throwing only one camera into the room. In NOVUS recorders, the image from such cameras is processed and displayed in the form of:
- VR mode
- 180 and 360 degrees panoramas
- cylinder
- virtual PTZ (2x2 division, one hemisphere + 3 virtual PTZ)
- virtual PTZ (3x3 division, one hemisphere + 8 virtual PTZ)
- 360 panorama + 3 virtual PTZ
- 360 panorama + 8 virtual PTZ
A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
Application example:
- counting the number of visitors to the selected store depending on days / week
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
Video | |
---|---|
IP Cameras | up to 32 channels at 3840 x 2160 resolution (video + audio) |
Maximum Supported Camera Resolution | 3840 x 2160 3000 x 3000 for fisheye cameras |
Compression | H.264, H.264+, H.265, H.265+ |
Monitor Output | main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously) spot: 1 x VGA (FullHD) |
Dualstreaming Support | yes |
Fisheye Support | yes, 2000/4000 IP series cameras |
Audio | |
Audio Input/Output | 1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA) |
Recording | |
Recording Speed | 960 fps (32 x 30 fps for 3840 x 2160 and lower) |
Stream Size | 320 Mb/s in total from all cameras |
Recording Mode | time-lapse, triggered by: manual, alarm input, motion detection, face recognition, intelligent image analysis functions, PIR alarm |
Prealarm/Postalarm | up to 3 s/up to 600 s |
Display | |
Display Speed | 960 fps (32 x 30 fps) |
Playback | |
Playback Speed | 480 fps (16 x 30 fps) |
Recorded Data Search | by date/time, events, image analysis events, motion in a defined area, related to face recognition, tags |
Backup | |
Backup Methods | USB port (HDD or Flash memory), network |
Backup File Format | JPG, BMP, PNG, MP4, AVI, RF |
Storage | |
Internal Storage | available mount: 4 x HDD 3.5” 14 TB SATA |
Total Internal Capacity | 56 TB |
External storage | 1 x eSATA |
Total External Capacity | 32 TB |
Alarm | |
Internal Alarm Input/Output | 16/1 relay type |
Camera Alarm Input/Output | supports IP camera’s alarm input/output |
System Reaction to Alarm Events | buzzer, e-mail, alarm output activation, screen message, recording activation, PTZ, Full Screen, FTP picture upload, FTP video upload, picture to Cloud, video to Cloud |
Intelligent image analysis | |
Supported Functions | Exception, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Detection, Pedestrian Detection, Cross Counting, Face Recognition, Sound detection, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle |
Network | |
Network Interface | 2 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s |
Network Protocols Support | HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, PPPoE, SMTP, P2P |
PC/MAC Software | NMS, Internet Explorer, NHDR-5000 Viewer/NHDR-5000 Viewer |
Mobile applications | RxCamView (iPhone, Android) |
Number of Simultaneous Connections | up to 96 clients |
Bandwidth | 320 Mb/s in total to all client workstations |
PTZ | |
PTZ Functions | pan/tilt/zoom, preset commands, patterns |
Auxiliary Interfaces | |
USB Ports | 1 x USB 3.0, 2 x USB 2.0 |
Operating system | |
Operating System | Linux |
OSD | languages: Polish, English, others |
Control | PC mouse and IR remote controller (in-set included), network |
System Diagnostic | automatic control of: HDDs, network, camera connection loss |
Security | password protection, IP filtering |
Installation parameters | |
Dimensions (mm) | 378 (W) x 66 (H) x 326 (D) |
Weight | 2.5 kg (without HDDs) |
Power Supply | 12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included) |
Power Consumption | 60 W (with 4 HDDs) |
Operating Temperature | -10°C ~ 45°C |