An all in one tool for professionals.
Multifunctional cable tester
NV-300CT
Description
- Locating and tracing wires in wall installations, cable harnesses and switch cabinets
- Measuring cable lengths and locating faults
- Test of wire continuity and correctness of connections in RJ45 cables
- UTP network cable test - checking sequence, bandwidth, cable type and shielding
- Identification of network ports by flashing LED (Port Flashing)
- PoE power detection and measurement, including IEEE 802.3BT/AT/AF standards
- Signal power measurement in fiber optic networks (transmission quality diagnostics)
- Safe detection of AC voltage without contact thanks to NCV/SNCV function
- Compact, portable design with easy-to-read display and rechargeable battery for field use
| Device Type | Multifunctional cable tester |
| Display | 3.0-inch monochrome display |
| Battery | Emitter: 3.7V 2000mAh lithium-ion rechargeable battery Probe: 3.7V 2000mAh lithium-ion rechargeable battery |
| Charging | USB type C 5VDC/1A |
| Dimensions | Emitter: 142 x 64 x 30 (mm) Probe: 218 x 48 x 32 (mm) |
| Operating temperature | from -10°C to +50°C |
| Humidity | from 30% to 90% |
| Functions | |
|---|---|
| Cable Tracing | Allows identification and tracing of wires in bundles, wall installations and switch cabinets. Cable types: twisted pair, telephone cable, BNC video cable, low-voltage metal cables |
| Measurement of cable length | Enables cable length measurement based on signal analysis, useful for determining cable length and locating damage. Range: from 1 to 600 meters Accuracy: ±(3% of measured length + 1 m) |
| UTP Test | Tests all the wires in the network cable. It recognizes connection sequence, bandwidth (100/1000 Mbit/s), cable type (straight, crossover), presence of shielding and short circuits between conductors. |
| Continuity Test | It performs a cable continuity test, confirming the correct connection of each wire along the entire length of the cable and the correctness of RJ45 plugs. Minimum recognition length: Emitter: 10cm, Probe: 100cm |
| Port Flashing | Allows to identify a network port on a switch or router by triggering the flashing of the LED of the corresponding port. |
| PoE Test | It allows detecting the presence of PoE power, identifying active PoE standards and measuring the power delivered by the network port. Supported standards: IEEE802.3BT/AT/AF Power range: 0-90W |
| Optical power measurement | It is used to measure optical signal power in fiber optic networks, enabling diagnostics and transmission quality assessment. Wavelength: 850, 980, 1270, 1300, 1310, 1490, 1550, 1557, 1625, 1650 (nm) Power range: from -70 to +6 (dBm) Interface 2.5mm compatible with connectors SC, FC, ST |
| NCV/SNCV | Detects an electromagnetic field, allowing to check whether a wire or socket is energized with AC voltage without direct contact. |
