• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

Recording speed up to 480 fps at 3840 x 2160



IP Recorder

NVR-4116-H1

Key features
  • Video and audio channels: 16
  • Supported protocols: ONVIF
  • Recording speed up to 480 fps at 3840 x 2160
  • Recorded stream size: 100 Mb/s in total from all cameras
  • Internal HDDs mount: 1
  • Monitor outputs: 2 (HDMI (4K UltraHD), VGA)
  • Intelligent image analysis
Functions
Functionalities
RxCamView

The mobile application allows for remote monitoring of a system based on 4000, AHD and Wi-Fi recorders via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage

Full camera configuration from NVR

The 4000 series recorders, in conjunction with the 4000 (former 2000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

Cross counting

A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
Application example:
- counting the number of visitors to the selected store depending on days / week

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Face detection

The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)

Video
IP Cameras

up to 16 channels at 3840 x 2160 resolution (video + audio)

Supported Resolution

max. 3840 x 2160

Compression

H.264, H.265

Monitor Output

main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)

Dualstreaming Support

yes

Audio
Audio Output

1 x line-out (RCA) 1 x HDMI

Recording
Recording Speed

480 fps (16 x 30 fps for 3840 x 2160 and lower)

Stream Size

100 Mb/s in total from all cameras

Recording Mode

time-lapse, triggered by: manual, alarm input, motion detection, intelligent image analysis functions, PIR alarm

Prealarm/Postalarm

up to 3 s/up to 600 s

Display
Display Speed

480 fps (16 x 30 fps)**

Playback
Playback Speed

480 fps (16 x 30 fps) **

Recorded Data Search

by date/time, events, image analysis events, motion in a defined area, tags

Backup
Backup Methods

DVD (option), USB port (HDD or Flash memory), network

Backup File Format

JPEG, BMP, PNG, MP4, AVI, RF

Storage
Internal storage

available mount: 1 x HDD 3.5” 10 TB SATA

Total Internal Capacity

10 TB

External storage

1 x eSATA

Total External Capacity

24 TB

Alarm
System Reaction to Alarm Events

buzzer, e-mail, alarm output activation, screen message, recording activation, PTZ, Full Screen, FTP picture upload, FTP video upload, picture to Cloud, video to Cloud

Intelligent image analysis
Supported functions

Exception, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Detection, Pedestrian Detection, Cross Counting, Sound detection

Network
Network Interface

1 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s

Network Protocols Support

HTTP, TCP/IP, IPv4, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, SMTP

PC/MAC Software

NMS, Internet Explorer, NHDR-5000 Viewer/NHDR-5000 Viewer

Mobile applications

RxCamView (iPhone, Android)

Max. Number of Connections with NVR

2

Bandwidth

64 Mb/s in total to all client workstations

PTZ
PTZ Functions

pan/tilt/zoom, preset commands, patterns

Auxiliary Interfaces
USB Ports

2 x USB 2.0

Operating system
Operating System

Linux

OSD

languages: Polish, English, others

Control

PC mouse and IR remote controller (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss

Security

password protection, IP filtering

Installation parameters
Dimensions (mm)

300 (W) x 53 (H) x 227 (D)

Weight

1.1 kg (without HDD)

Power Supply

12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included)

Power Consumption

20 W (with 1 HDD)

Operating Temperature

-10°C ~ 45°C

* List of compatible HDD models and maximum of their capacities is available in section DOWNLOADABLE FILES.
** Available with dual streaming mode.
Support for intelligent image analysis works only with NOVUS IP 2000/4000 series cameras.
File name Description  
NHDR5000Viewer_ENPL_1.0.pdf
User manual
5.76 MB
RXCamView_ENPL_1.0_3.pdf
User manual
3.57 MB
CE_NVR_4116_4204P4_4308P8_H1_EN.pdf
Certificate
379.03 KB
NVR-4000_full_ENPL_v.1.2.pdf
User manual
29.97 MB
NVR-4000_EN_PL_short_v.1.2.pdf
User manual
4.2 MB
NHDR-5000 Viewer_1.4.83_2018_11_23.exeSoftware

23 MB
NHDR-5000 Viewer_1.4.85_2018_11_28_MAC.zipSoftware

25.64 MB
NVR-4000_AHD_WIFISET_Lista_dyskow_HDD_compatible_list_2019_02_20.xlsxCompatibility table

16.34 KB

See our channel on