• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS VSS
  • NMS AC
  • ANPR

Face Detection Function



Vandal IP Camera with Motor-zoom Lens

NVIP-8V-6402M/F

Archival product
Key features
  • Resolution: 8 MPX (4K Ultra HD)
  • Lens: motorized, auto-focus function, f=3.3 ~ 12 mm/F1.4
  • D/N function - IR cut filter
  • Video content analysis
  • microSD card support
  • Min. Illumination: 0.01 lx (0 lx, IR on)
  • IR LED, range up to 30 m
Functions
Functionalities
Face detection

Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.

SuperLive Plus application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Configuration of cameras from the NVR

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

Motorzoom lens

Lens with the possibility of remote focal and focus adjustment using a recorder, web browser, Novus Management System VSS software or even a mobile application.

SD Card slot

The camera equipped with an SD card slot allows local recording of video material, so it is resistant to possible interference in the transmission of data between the camera and the recorder. Playback and export of saved material can be done from the level of the web browser.

NMS Compatible

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.

The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.

ONVIF standard

The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

IK10

The IK scale is used to determine the degree of protection against equipment impact, including camera casings used in monitoring. The highest level of IK scale is "IK10" means that the camera is resistant to impacts with a strength of 20J, which translates into the equivalent of the fall of the object weighing 5kg from a height of 40cm.

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Face detection

The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

Sabotage

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

Image
Image Sensor

8 MPX CMOS sensor 1/2.5” SONY Exmor R STARVIS

Number of Effective Pixels

3840 (H) x 2160 (V)

Min. Illumination

0.01 lx/F1.4 - color mode,

0 lx (IR on) - B/W mode

Electronic Shutter

auto/manual: 1/3 s ~ 1/10000 s

Digital Slow Shutter (DSS)

up to 1/3 s

Wide Dynamic Range (WDR)

yes

Digital Noise Reduction (DNR)

2D, 3D

Defog Function (F-DNR)

yes

Highlight Compensation (HLC)

yes

Back Light Compensation (BLC)

yes

Reduction of image flicker (Antiflicker)

yes

Lens
Lens Type

motorized, f=3.3 ~ 12 mm/F1.4

Auto-focus

zoom trigger, day/night mode trigger, manual trigger

Day/Night
Switching Type

mechanical IR cut filter

Switching Mode

auto, manual, time, light sensor

Switching Level Adjustment

yes

Switching Delay

2 ~ 120 s

Switching Schedule

yes

Visible Light Sensor

yes

Network
Stream Resolution

3840 x 2160 (4K Ultra HD), 2560 x 1440 (QHD), 2304 x 1296, 1920 x 1080 (Full HD), 1280 x 720 (HD), 640 x 480 (VGA), 480 x 240, 320 x 240 (QVGA)

Frame Rate

30 fps for 3840 x 2160 (UHD) and lower resolutions

Multistreaming Mode

3 streams

Video/Audio Compression

H.264, H.264+, H.265, H.265+, MJPEG/G.711

Number of Simultaneous Connections

max. 4

Bandwidth

50 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4, UDP, FTP, DHCP, DDNS, NTP, RTSP, PPPoE, SMTP, SSL/TLS

Camera Configuration

from Internet Explorer browser

languages: Polish, English, Russian, and others

Compatible Software

NOVUS MANAGEMENT SYSTEM VSS, NVR-6000 Viewer

Mobile applications

SuperLive Plus (iPhone, Android)

Other functions
Privacy Zones

4

Motion Detection

yes

Region of interest (ROI)

8

Video Content Analysis (VCA)

tamper, abandoned object, object disappearance, line cross, zone entrance, face detection, scene change, video blurred, video color cast

Image Processing

90˚ image rotation, 180˚ image rotation, sharpening, mirror effect, corridor mode, vertical flip, horizontal flip

Prealarm/Postalarm

up to 6 s/up to 120 s

System Reaction to Alarm Events

e-mail with attachment, saving file on FTP server, saving file on SD card, alarm output activation

Restoring default settings

via web browser, using reset button, via NMS IPTool software

IR LED
LED Number

30

Range

30 m

Angle

90°

Smart IR

yes (software support)

Interfaces
Video Output

BNC, 1.0 Vp-p, 75 Ohm - maintenance only

Audio Input/Output

1 x Jack (3.5 mm)/1 x Jack (3.5 mm)

Alarm Input/Output

1 (NO/NC)/1 relay type (max. 12VDC/300mA)

RS-485

yes

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Memory Card Slot

microSD - capacity up to 128GB

Installation parameters
Dimensions (mm)

150 (Ф) x 114 (H)

Weight

1 kg

Degree of Protection

IP 66 (details in the user’s manual)

Enclosure

vandalproof IK10 impact rating aluminium, white

Power Supply

12 VDC, PoE (IEEE 802.3af, Class 3)

Surge protection

TVS 4000 V

Power Consumption

4.5 W,

6.5 W (IR illuminator on)

Operating Temperature

-30°C ~ 60°C

File name Description  
NVIP-8V-6402M_F_SHORT_EN_PL_ver1.0.pdf
User manual
3.01 MB
CE_NVIP_8V_6402M_F_PL.pdf
Certificate
101.17 KB
VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdfUser manual

4.24 MB
NVIP-6000_series_FULL_EN_PL_v1.0.pdfUser manual

4.66 MB
NmsIPTool_4.0.exeSoftware

209.43 MB
NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_14.03.2024.xlsxCompatibility table

347.88 KB
PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdfOthers

710.61 KB

See our channel on