• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

Recording speed up to 240 fps at 3840 x 2160



IP Recorder

NVR-4408P8-H1/F-II

Key features
  • 8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s
  • Video and audio channels: 8
  • Supported protocols: ONVIF
  • Recording speed up to 240 fps at 3840 x 2160
  • Recorded stream size: 128 Mb/s in total from all cameras
  • Internal HDDs mount: 1
  • Monitor outputs: 2 (HDMI (4K UltraHD), VGA)
  • Face recognition
Functions
Functionalities
RxCamView

The mobile application allows for remote monitoring of a system based on 4000, AHD and Wi-Fi recorders via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage

Cooperation with cameras with a PIR detector

4000 Series recorders are able to receive a message about the detection of a moving object by a PIR detector built into the front panel of the camera. A passive infrared detector allows us to eliminate false motion detections caused by eg:
- lights of passing cars
- shadow movements
- reflections from shiny surfaces
- leaves / trees movement in the wind
The principle of operation of the PIR detector is based on the detection of heat changes in the detection zone, therefore the alarm is generated only when a human or other object that differs in temperature from the environment appears on the stage.

HTML5 standard support

The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.

Configuration of cameras from the NVR

 

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

Face detection

Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.
 

Cross counting

A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
Application example:
- counting the number of visitors to the selected store depending on days / week

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265+

Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Face detection

The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)

Sabotage

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)

Video
IP Cameras

up to 8 channels at 3840 x 2160 resolution (video + audio)

Maximum Supported Camera Resolution

3840 x 2160

3000 x 3000 for fisheye cameras

Compression

H.264, H.264+, H.265, H.265+

Monitor Output

main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)

Dualstreaming Support

yes

Audio
Audio Input/Output

- / 1 x HDMI, 1 x line-out (RCA)

Recording
Recording Speed

240 fps (8 x 30 fps for 3840 x 2160 and lower)

Stream Size

128 Mb/s in total from all cameras

Recording Mode

time-lapse, triggered by: manual, alarm input, motion detection, intelligent image analysis functions, PIR alarm

Prealarm/Postalarm

up to 3 s/up to 600 s

Display
Display Speed

240 fps (8 x 30 fps)

Playback
Playback Speed

240 fps (8 x 30 fps)

Recorded Data Search

by date/time, events, image analysis events, motion in a defined area, related to face recognition, tags

Backup
Backup Methods

USB port (HDD or Flash memory), network

Backup File Format

JPG, BMP, PNG, MP4, AVI, RF

Storage
Internal Storage

available mount: 1 x HDD 3.5” 10 TB SATA

Total Internal Capacity

10 TB

Alarm
Camera Alarm Input/Output

supports IP camera’s alarm input/output

System Reaction to Alarm Events

buzzer, e-mail, screen message, recording activation, PTZ, Full Screen, FTP picture upload, FTP video upload, picture to Cloud, video to Cloud

Intelligent image analysis
Supported Functions

Exception, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Crowd detection, Face Detection, Pedestrian Detection, Cross Counting, Face Recognition, People Counting, Sound detection, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, Objects Distinguishing, Queue Lenght Detection, Heat Map

Network
Network Interface

1 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s

8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s with Extended mode

Network Protocols Support

HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, SMTP, P2P, HTML5

PC/MAC Software

NMS, Internet Explorer, NHDR-5000 Viewer, Firefox, Chrome, Opera, Edge/Safari, NHDR-5000 Viewer

Mobile applications

RxCamView (iPhone, Android)

Number of Simultaneous Connections

up to 40 clients

Bandwidth

128 Mb/s in total to all client workstations

PTZ
PTZ Functions

pan/tilt/zoom, preset commands, patterns

Auxiliary Interfaces
USB Ports

2 x USB 2.0

Operating system
Operating System

Linux

OSD

languages: Polish, English, others

Control

PC mouse and IR remote controller (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss

Security

password protection, IP filtering

Installation parameters
Dimensions (mm)

300 (W) x 53 (H) x 227 (D)

Weight

1.1 kg (without HDD)

Power Supply

48 VDC (100 ~ 240 VAC/48 VDC PSU in-set included)

Power Consumption

20 W (with 1 HDD) + 59 W PoE

Operating Temperature

-10°C ~ 45°C

In order to take full advantage of the recorder capabilities it is recommended to use NOVUS IP 4000 series cameras.
The availability of individual functions (including face recognition) depends on the model of cameras used as well as the software version of the recorder and cameras.
In order to create face recognition system please deploy 4000 series cameras with "F" in the model name only.
Detailed data on camera compatibility with recorders and compatible hard drives can be found in the compatibility tables available in the DOWNLOADABLE FILES tab.
Display and playback speeds are achieved using dual stream.
File name Description  
NHDR5000Viewer_ENPL_1.0.pdf
User manual
5.76 MB
RXCamView_ENPL_1.0_3.pdf
User manual
3.57 MB
NVR-4000_full_ENPL_v.1.2.pdf
User manual
29.97 MB
NVR-4408P8-H1F-II_EN_PL_short_v.1.1.pdf
User manual
5.49 MB
CE_NOVUS NVR_4408P8_H1F_II-sig.pdf
Certificate
1.25 MB
NHDR-5000 Viewer_1.5.35_2020_07_14.exeSoftware

25.28 MB
NHDR-5000 Viewer_1.5.38_2020_08_25_MAC.zipSoftware

27.63 MB
NHDR and NVR4000 security recommendations rekomendacje bezpieczenstwa ENPL_3.pdfOthers

2.9 MB
Wydajnosc NVR4000 performance 20220404.xlsxOthers

16.07 KB
NVR-4000_AHD_WIFISET_Lista_dyskow_HDD_compatible_list_2020_10_20.xlsxCompatibility table

17.45 KB
NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_18.03.2022.xlsxCompatibility table

281.23 KB

See our channel on