• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

IR LED, range up to 30 m



Vandal Proof IP Camera with PIR detector

NVIP-2VE-4201/PIR

Key features
  • Resolution: 2 MPX
  • D/N function - IR cut filter
  • Lens: standard, f=2.8 mm/F1.85
  • reduction of false alarms - PIR detector
  • Min. Illumination: 0.01 lx (0 lx, IR on)
  • IR LED, range up to 30 m
Functions
Functionalities
Build-in PIR sensor

Thanks to the use of a passive infrared detector, which was built into the front panel of the camera, we can eliminate false motion detections caused by eg:
- lights of passing cars
- shadow movements
- reflections from shiny surfaces
- leaves / trees movement in the wind
The principle of operation of the PIR sensor is based on the detection of heat changes in the detection zone, therefore the alarm is generated only when a human or other object that differs in temperature from the environment appears on the area.

Full camera configuration from NVR

The 4000 series recorders, in conjunction with the 4000 (former 2000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

RxCamView

The mobile application allows remote monitoring of a system based on 4000 (former 2000) series cameras supporting P2P functionality, via a smartphone with Android or iOS. Basic camera configuration as well as PTZ control are available from the phone. The application allows you to connect to cameras via P2P using the QR code, without the need for additional network configuration.

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Vandal Proof

A vandal-proof camera is a camera whose construction makes it difficult to destroy or knock down from the assembly place. Most often these are dome cameras in a metal housing. In addition, the shape and design of the polycarbonate diffuser should protect it against breakage or cracking.

Image
Image Sensor

2 MPX CMOS sensor 1/2.7” SmartSens

Number of Effective Pixels

1920 (H) x 1080 (V)

Min. Illumination

0.01 lx/F1.85 - color mode,

0 lx (IR on) - B/W mode

Electronic Shutter

auto/manual: 1/5 s ~ 1/20000 s

Digital Slow Shutter (DSS)

up to 1/5 s

Wide Dynamic Range (WDR)

yes

Digital Noise Reduction (DNR)

3D

Defog Function (F-DNR)

yes

Back Light Compensation (BLC)

yes

Lens
Lens Type

standard, f=2.8 mm/F1.85

Day/Night
Switching Type

mechanical IR cut filter

Switching Mode

auto, manual

Switching Delay

1 ~ 36 s

Visible Light Sensor

yes

Network
Stream Resolution

1920 x 1080 (Full HD), 1280 x 960, 1280 x 720 (HD), 640 x 480 (VGA), 320 x 240 (QVGA)

Frame Rate

25 fps for 1920 x 1080 (Full HD) and lower resolutions

Multistreaming Mode

2 streams

Video/Audio Compression

H.264, H.265/-

Number of Simultaneous Connections

max. 5

Bandwidth

8 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4, FTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, SMTP

ONVIF Protocol Support

Profile S (ONVIF 2.6)

Camera Configuration

from Internet Explorer browser

languages: Polish, English, Russian, and others

Compatible Software

NMS

Other functions
Privacy Zones

4

Motion Detection

yes

PIR detector

range up to 7 m

Image Processing

180˚ image rotation, vertical flip, horizontal flip

System Reaction to Alarm Events

e-mail with attachment, saving file on FTP server

IR LED
LED Number

18

Range

30 m

Angle

60°

Interfaces
Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Installation parameters
Dimensions (mm)

100 (Ф) x 90 (H)

Weight

0.43 kg

Degree of Protection

IP 66 (details in the user’s manual)

Enclosure

vandalproof aluminium, white

Power Supply

PoE, 12 VDC

Surge protection

TVS 4000 V

Power Consumption

1.5 W,

4 W (IR on)

Operating Temperature

-30°C ~ 55°C

File name Description  
IP2000 series Device Config Tool with manuals_1.zip
Software
6.2 MB
IP2000 series password generators with manual.zip
Software
1.61 MB
CE_NVPI_2H_4201_PIR_2VE_4201_PIR_EN.pdf
Certificate
375.53 KB
NVIP-2VE-4201-PIR_SHORT_EN_PL_v1.pdf
User manual
3.75 MB
Accessories Compatibility Tables_Tabele kompatybilnosci akcesoriow 17.05.2019.xlsxCompatibility table

5.13 MB
NVIP-4000_series_FULL_EN_PL_v1.0.pdfUser manual

5.8 MB
Compatibility_table_tabela_kompatyb._IP_Camera_NVR_13.05.2019.xlsxCompatibility table

126.02 KB

See our channel on