• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

IP Recorder


Key features
  • 8 x Ethernet PoE - RJ-45 interface
  • Video and audio channels: 8
  • Supported protocols: ONVIF
  • Recording speed up to 240 fps at 2592 x 1944
  • Supports resolution up to 2592 x 1944
  • Recorded stream size: 40 Mb/s in total from all cameras
  • Internal HDDs mount: 1
  • Monitor outputs: 2 (HDMI, VGA)
  • Intelligent image analysis
SuperLive Plus application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Full camera configuration from NVR

The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

Dynamic change of stream parameters

The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording

Smart Playback

Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.


Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.


The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits


The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects


The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)


The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

IP Cameras

up to 8 channels at 2592 x 1944 resolution (video + audio)

Supported Resolution

max. 2592 x 1944


H.264, H.264+, H.265

Monitor Output

main (split screen, full screen, sequence): 1 x HDMI, 1 x VGA (up to 2 monitors simultaneously)

Dualstreaming Support


Audio Output

1 x HDMI

Recording Speed

240 fps (8 x 30 fps for 2592 x 1944)

Stream Size

40 Mb/s in total from all cameras

Recording Mode

time-lapse, triggered by: manual, motion detection


up to 5 s/up to 600 s

Display Speed

240 fps (8 x 30 fps)

Playback Speed

240 fps (8 x 30 fps for 2592 x 1944) *

Recorded Data Search

by date/time, events

Backup Methods

USB port (HDD or Flash memory), network

Backup File Format


Internal Storage

available mount: 1 x HDD 3.5” 6 TB SATA

Total Internal Capacity

6 TB

Camera Alarm Input/Output

supports camera’s alarm input/output

Motion Detection

supports camera’s motion detection

System Reaction to Alarm Events

buzzer, recording activation, PTZ, e-mail with atatchment

Intelligent image analysis
Supported Functions

Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

8 x Ethernet PoE - RJ-45 interface

Network Protocols Support


ONVIF Protocol Support

Profile S (ONVIF 2.2 or higher)

PC/MAC Software

NMS, Internet Explorer, NVR-6000 Viewer/NVR-6000 Viewer

Mobile applications

SuperLive Plus (iPhone, Android)

Max. Number of Connections with NVR



40 Mb/s in total to all client workstations

PTZ Functions

pan/tilt/zoom, preset commands

Auxiliary Interfaces
USB Ports

2 x USB 2.0,

Operating system
Operating System


Operation Mode



languages: Polish, English, others


PC mouse (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss


password protection, IP filtering, MAC filtering

Installation parameters
Dimensions (mm)

255 (W) x 42 (H) x 233 (D)


0.84 kg (without HDD)

Power Supply

100 ~ 240 VAC

Power Consumption

15 W (with 1 HDD) + 105 W PoE

Operating Temperature

-10°C ~ 50°C

Support for intelligent image analysis works only with NOVUS IP 3000 series cameras
* Available with dual streaming mode.
File name Description  
User manual
10.66 MB
User manual
13.99 MB
74 MB
79.31 MB
NVR-6000-Viewer MAC.zip
17.15 MB
NVR-6000_NVR-7000_Lista_dyskow_HDD_compatible_list_2019.09.30.xlsCompatibility table

153 KB
Compatibility_table_tabela_kompatyb._IP_Camera_NVR_17.10.2019.xlsxCompatibility table

186.88 KB

See our channel on