• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

Recording speed up to 1920 fps at 3840 x 2160

IP Recorder


Key features
  • Video and audio channels: 64
  • Supported protocols: ONVIF, RTSP
  • Recording speed up to 1920 fps at 3840 x 2160
  • Supports resolution up to 3840 x 2160
  • Recorded stream size: 320 Mb/s in total from all cameras
  • Internal HDDs mount: 8
  • Monitor outputs: 3 (HDMI (4K UltraHD), HDMI, VGA)
  • RAID protects recordings
  • Intelligent image analysis
SuperLive Plus application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Full camera configuration from NVR

The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

Dynamic change of stream parameters

The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording

Smart Playback

Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.


The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Face detection

The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)


The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)


The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

IP Cameras

up to 64 channels at 3840 x 2160 resolution (video + audio)

Maximum Supported Camera Resolution

3840 x 2160


H.264, H.264+, H.265, H.265+, H.265 Smart

Monitor Output

main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD)

spot: 1 x HDMI (FullHD)

Dualstreaming Support


Fisheye Support

yes, 3000/6000 IP series cameras

Audio Output

1 x line-out (RCA) 1 x HDMI

Recording Speed

1920 fps (64 x 30 fps for 3840 x 2160 and lower)

Stream Size

320 Mb/s in total from all cameras

Recording Mode

time-lapse, triggered by: manual, alarm input, motion detection, intelligent image analysis functions


up to 5 s/up to 600 s

Display Speed

1920 fps (64 x 30 fps)

Playback Speed

480 fps (16 x 30 fps)

Recorded Data Search

by date/time, events, motion in a defined area, related to face recognition

Backup Methods

USB port (HDD or Flash memory), network

Backup File Format

AVI, RPAS (player included)

Internal Storage

available mount: 8 x HDD 3.5” 14 TB SATA

Total Internal Capacity

112 TB



Internal Alarm Input/Output

8/4 relay type

Camera Alarm Input/Output

supports camera’s alarm input/output

Motion Detection

supports camera’s motion detection

System Reaction to Alarm Events

buzzer, e-mail, alarm output activation, recording activation, PTZ

Intelligent image analysis
Supported Functions

Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Detection, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle

Network Interface

2 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s

Network Protocols Support


ONVIF Protocol Support

Profile S (ONVIF 2.2 or higher)

PC/MAC Software

NMS, Internet Explorer, NVR-6000 Viewer/-

Mobile applications

SuperLive Plus (iPhone, Android)

Number of Simultaneous Connections

up to 20 clients, up to 68 main streams or 256 substreams or 32 playback streams in total


320 Mb/s in total to all client workstations

PTZ Functions

pan/tilt/zoom, preset commands

Auxiliary Interfaces
USB Ports

2 x USB 2.0, 1 x USB 3.0

Operating system
Operating System



languages: Polish, English, others


PC mouse and IR remote controller (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss


password protection, IP filtering, MAC filtering

Installation parameters
Dimensions (mm)

430 (W) x 90 (H) x 453 (D)


6 kg (without HDD)

Power Supply

100 ~ 240 VAC

Power Consumption

175 W (with 8 HDDs)

Operating Temperature

-10°C ~ 50°C

RACK Mount 19"


Support for intelligent image analysis works only with NOVUS IP 6000 & 3000 series cameras
The availability of the following functions: double-stream operation, motion detection, alarm inputs / outputs, PTZ control depends on the functionality of the camera and the capabilities of the communication protocol. Detailed data can be found in the compatibility table available in the DOWNLOADS tab.
H.265 Smart support from firmware version 1.4.4.
Opis cennikowy

64 channels at 3840 x 2160 resolution (video + audio); Stream Size: 320 Mb/s in total from all cameras; Internal storage for recording: available mount: 8 x HDD 3.5” 14 TB SATA; Internal Alarm Input/Output: 8/4 relay type; Recording: Recording speed up to 1920 fps at 3840 x 2160; Supported Resolution: Supports resolution up to 3840 x 2160; Monitor Output: Main: (1xHDMI (4K UltraHD), 1xVGA), Spot: (1xHDMI); RACK Mount 19": 2U;

File name Description  
User manual
1.9 MB
Compatibility table
156 KB
1.69 MB
User manual
5.42 MB

74.71 MB

79.9 MB
NVR6000 rekomendacja bezpieczeństwa.pdfInstallation and Maintenance Manual

1.5 MB
NVR-6000_series_FULL_EN_PL_v1.2_(fw. up to 1.3.4).pdfUser manual

10.7 MB
NVR-6000_series_FULL_EN_PL_v2.0_(fw. 1.4.1).pdfUser manual

30.98 MB

See our channel on