Dual IP Camera (Thermal/Visual)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined detection zone.
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
Image analysis function based on Deep Learning, allowing the detection of a certain level of crowd density in a defined area. The camera can trigger an alarm when the number of people in the protected area exceeds the defined number.
Intelligent image analysis function based on Deep Learning, enabling the recognition of human and car shapes. The sophistication and efficiency of the analysis methods used, allow for distinguishing objects even as small as a few percent of the scene, and for simultaneous monitoring of many objects of different types.
The thermal image is created based on thermal radiation emitted by objects. Thanks to this, thermal imaging cameras allow effective observation even in total darkness and during adverse weather conditions such as fog, where standard cameras, even those equipped with an IR illuminator, do not work. In addition, thermal imaging cameras have been equipped with image analysis functions thanks to which the detection efficiency of objects is very high.
The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
This function allows to trigger an alarm after detecting exceeding a set temperature threshold in a specific zone, point or on a defined line. Possible alarm responses are: local alarm, alarm in NMS, e-mail, save to FTP, save to SD card, activation of the alarm output.
This function allows the temperature of objects to be measured at a selected point/area of the observed scene.
|Image - Thermal Module|
Uncooled FPA Microbolometer
|Number of Effective Pixels|
400 (H) x 300 (V)
8 - 14 µm
White Hot, Black Hot, Rainbow, Ironbow, HSV, Autumn, Bone, Cool, Copper, Fire Hot, Pink, Spring, Summer, Winter, Jet, Flame, Rosebengal
-20°C ~ 150°C
|Digital Noise Reduction (DNR)|
|Lens - Thermal Module|
|Object Detection Range|
235m - human , 722m - vehicle
|Object Recognition Range|
59m - human , 180m - vehicle
720 x 576 (D1), 352 x 288 (CIF)
30 fps for each resolution
2 streams (main stream, sub stream)
H.264, H.265/G.711, RAW_PCM
|Number of Simultaneous Connections|
8 Mb/s in total
|Network Protocols Support|
HTTP, TCP/IP, IPv4/v6, UDP, HTTPS, FTP, DHCP, DNS, DDNS, RTSP, RTP, SNMP, QoS, IEEE 802.1X, PPPoE, SMTP, RTCP, HTML5
|ONVIF Protocol Support|
from Internet Explorer, Firefox, Chrome, Edge browser
languages: Polish, English, and others
|Temperature Measurement Zones|
20 polygon, line, point
|Temperature Measurement Accuracy|
+-2°C / +-2%
4 video mask type: single color
|Video Content Analysis (VCA)|
abandoned object, object disappearance, line cross, zone entrance, zone exit, double line cross, loiter, converse, pedestrian detection, people counting, vehicle detection, human body temperature mesuring, intrusion detection, smoker detection, fire detection
up to 5 MB/up to 86400 s
|System Reaction to Alarm Events|
e-mail, saving file on FTP server, saving file on SD card, alarm output activation
|Restoring default settings|
using reset button
1 x Ethernet - RJ-45 interface, 10/100 Mbit/s
|Memory Card Slot|
SD - capacity up to 128GB
with bracket: 110 (Ф) x 388 (L)
|Degree of Protection|
IP 66 (details in the user’s manual)
aluminium, white, fully cable managed wall mount bracket in-set included
12 VDC, PoE (IEEE 802.3af, Class 3)
TVS 4000 V
-40°C ~ 60°C
max. 90%, relative (non-condensing)
|Camera's maintenance tips_Wskazowki konserwacji kamer_v1.0.pdf||Others||
|PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdf||Others||