• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS VSS
  • NMS AC
  • ANPR

Active deterrent function



Bullet IP camera with white light and IR illuminators

NVIP-8H-4511/FWLAD

Key features
  • Resolution: 8 MPX (4K Ultra HD)
  • Lens: fixed focal, f=2.8 mm/F1.0
  • active deterrence
  • D/N function - IR cut filter
  • Video content analysis based on Deep Learning
  • microSD card support
  • two-way audio
  • Min. Illumination: 0.007 lx (0 lx, IR on)
  • IR LED, range up to 25 m
  • white LED illuminator, range up to 20 m
  • "Two way power" - when connected to a PoE switch, it allows to power the low power receiver from the camera's power socket
Compatibility
Functions
Description

The camera is dedicated to work with NOVUS 4000 series recorders. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.

Functionalities
DUO light

Novus DUO light cameras are equipped with an infrared illuminator and a white light illuminator used as smart supplement light. This means that the camera operating in night mode, when it detects an object, turns on the white light illuminator thus obtaining a color image with much more information about the detected objects. With DUO light, identifying people, vehicles and events is much easier.

Active Deterrence

Active deterrence allows the camera to detect and react to objects to deter potential intruders. When the camera detects an object, it can glow solid or flash, emit warning sounds or voice messages (number and selection of deterrent functions may vary depending on the camera model). This function is designed to protect the place that is being monitored, discourage the intruder from further actions and scare him away without the need for security intervention.

INGENIUS PLUS - Object classification

INGENIUS PLUS - a new generation of intelligent image analysis based on Deep Learning. The algorithm used allows the camera to recognize the shape of a human, a car and bike/motorcycle, even as small as 1% of the stage. The efficiency of the analysis methods used allows simultaneous classify and monitoring of up to 32 objects of different types.

INGENIUS PLUS – Cross Counting

Image analysis based on Deep Learning enabling the counting of objects with recognized shapes (human, a car and bike/motorcycle) that crossed the virtual line. The camera can display the number of these objects in the image.

INGENIUS PLUS - Intrusion

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined detection zone.
Application example:
- perimeter protection of the object
- protection of strategically important objects

INGENIUS PLUS - Heat Map

Image analysis function based on Deep Learning, enabling the graphical representation of the intensity of traffic in the observed area. The algorithm of the function creates an illustrative map of the intensity of the movement, overlaying the image from the camera with a color palette, in which warmer colors correspond to greater intensity of movement, and cooler ones - to a lower intensity.
 

INGENIUS PLUS - Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

INGENIUS PLUS - Queue Length Detection

Image analysis function based on Deep Learning, allowing to detect and analyze the number of people waiting in the queue. The camera can trigger an alarm when the queue length exceeds a certain number of people, or when the service time exceeds a certain time.
 

INGENIUS PLUS - Crowd Density Detection

Image analysis function based on Deep Learning, allowing the detection of a certain level of crowd density in a defined area. The camera can trigger an alarm when the number of people in the protected area exceeds the defined number.
 

INGENIUS PLUS – Intrusion

Image analysis function based on Deep Learning, allows to create a virtual detection zone and trigger an alarm after violating the boundaries of this zone by defined objects with recognized shapes (a human or a car).
Application example:
- perimeter protection of the facility
- protection of strategically important objects
 

INGENIUS PLUS – Cross Counting

Image analysis function based on Deep Learning, enabling the counting of objects with recognized shapes (a human, a car), that crossed the virtual line. The camera can display the number of these objects in the image.
 

Face detection

Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.
 

Hardware Smart IR

The Smart IR functionality allows you to dynamically adjust the level of infrared illuminator built into the camera to the distance from the observed object. Thanks to this, the image is not overexposed, and the objects are clear even in close proximity to the camera.

RxCamView

The mobile application allows for remote monitoring of a system based on 4000, AHD and Wi-Fi recorders via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage

P2P

All cameras of the 4000 series have an autonomous P2P functionality that works with the RxCamView application. The camera which we provide Internet access can connect directly to the application using the QR code (via the P2P server). The solution is useful for large / dispersed objects where we only need live view.

HTML5 standard support

The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.

Two Way Power

Two way power function allows for using DC connector in camera (12V) as an output, when camera is powered by PoE. Maximum power output is 3W, so this solution is recommended mostly for active powered microphones (for cameras with audio input). 

Configuration of cameras from the NVR

 

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

SD Card slot

The camera equipped with an SD card slot allows local recording of video material, so it is resistant to possible interference in the transmission of data between the camera and the recorder. Playback and export of saved material can be done from the level of the web browser.

NMS Compatible

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

H.265+

Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

Image
Image Sensor

8 MPX CMOS sensor 1/2.7” SmartSens

Number of Effective Pixels

3840 (H) x 2160 (V)

Min. Illumination

0.007 lx/F1.0 - color mode,

0 lx (IR on) - B/W mode

Electronic Shutter

auto/manual: 1/5 s ~ 1/20000 s

Digital Slow Shutter (DSS)

up to 1/5 s

Wide Dynamic Range (WDR)

yes

Digital Noise Reduction (DNR)

2D, 3D

Highlight Compensation (HLC)

yes

Back Light Compensation (BLC)

yes

Reduction of image flicker (Antiflicker)

yes

Lens
Lens Type

fixed focal, f=2.8 mm/F1.0

Day/Night
Switching Type

mechanical IR cut filter

Switching Mode

auto, manual, time

Switching Delay

1 ~ 36 s

Network
Stream Resolution

3840 x 2160 (4K Ultra HD), 3072 x 1728, 2592 x 1944, 2592 x 1520, 2560 x 1440 (QHD), 2304 x 1296, 1920 x 1080 (Full HD), 1280 x 960, 1280 x 720 (HD), 640 x 480 (VGA), 320 x 240 (QVGA)

Frame Rate

20 fps for each resolution

Multistreaming Mode

3 streams (main stream, sub stream, third stream)

Video/Audio Compression

H.264, H.264+, H.265, H.265+/G.711

Number of Simultaneous Connections

max. 3 connections, (max. 40 streams in total)

Bandwidth

30 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, UPnP, SNMP, SMTP, P2P, HTML5

Camera Configuration

from Internet Explorer, Firefox, Chrome, Safari, Edge browser

languages: Polish, English, and others

Compatible Software

NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC

Mobile applications

RxCamView (iPhone, Android)

Other functions
Privacy Zones

4 video mask type: single color

Motion Detection

yes

Region of interest (ROI)

8

Audio Detection

yes

Video Content Analysis (VCA)

abandoned object, object disappearance, line cross, zone violation, multi loiter, face detection, cross counting, heat map, queue length detection, objects distinguishing, target counting by area

Image Processing

180˚ image rotation, vertical flip, horizontal flip

Prealarm/Postalarm

up to 5 s/up to 30 s

System Reaction to Alarm Events

e-mail with attachment, saving file on FTP server, saving file on SD card, saving in the cloud storage, push notification, active deterrent functions

Determent

white LEDs, steady/flashing light, red and blue LEDs, flashing light,

audio signaling device (siren), built-in speaker (custom voice messages)

Restoring default settings

via web browser, using reset button

IR LED
LED Number

1

Range

25 m

Smart IR

yes (hardware support)

White light illuminator
LED Number

2, warm white color

Range

20 m

Smart Light

yes (hardware support)

Interfaces
Audio Input/Output

built-in microphone/speaker

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Memory Card Slot

microSD - capacity up to 256GB

Installation parameters
Dimensions (mm)

with bracket: 71 (Ф) x 150 (L)

Weight

0.36 kg

Degree of Protection

IP 66 (details in the user’s manual)

Enclosure

aluminium, white, fully cable managed wall mount bracket in-set included

Power Supply

12 VDC, PoE (IEEE 802.3af, Class 3)

Surge protection

TVS 4000 V

Power Consumption

2.5 W,

3.8 W (IR illuminator on),

5.3 W (white light illuminator on),

7 W (active deterrence functions enabled)

Operating Temperature

-35°C ~ 60°C

Humidity

max. 95%, relative (non-condensing)

File name Description  
NVIP-8x-4511_FWLAD_EN_PL_v1.1.pdf
User manual
2.8 MB
CE_NOVUS NVIP_8H_4511_FWLAD-sig.pdf
Certificate
627.27 KB
Accessories with cameras compatibility_Kompatybilnosc akcesoriow i kamer_12.02.2024.xlsxCompatibility table

3.63 MB
NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_26.02.2024.xlsxCompatibility table

347.27 KB
Device Config Tool_1.0.2.46 with manual.zipSoftware

30.85 MB
IP4000_Image analysis - camera installation guidelines_wskazówki instalacji kamer_EN_PL_v1.0.pdfUser manual

1.12 MB
IP2000_ 4000 cameras security recommendations_rekomendacje bezpieczenstwa_EN_PL_v1.0.pdfOthers

1005.7 KB
NmsIPTool_4.0.exeSoftware

209.43 MB
Camera's maintenance tips_Wskazowki konserwacji kamer_v1.0.pdfOthers

204.85 KB
PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdfOthers

710.61 KB
NVIP-4000_series_FULL_EN_PL_v1.6.pdfUser manual

8.16 MB

4000 VSS NVR

See our channel on