• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS VSS
  • NMS AC
  • ANPR

Intelligent image analysis



8-channel IP Recorder

NVR-6408-H1/F-II

Key features
  • 8 x video and audio channels
  • Recording speed up to 240 fps at 5520 x 2400
  • Supports resolution up to 5520 x 2400
  • Recorded stream size: 160 Mb/s in total from all cameras
  • 1 x internal place for HDD mounting
  • 2 x monitor outputs (HDMI, VGA)
  • Face recognition
Compatibility
Functions
Description

The recorder is dedicated to work with NOVUS 6000 series IP cameras. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.

Functionalities
Face detection

Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.

Licence plates recognition

The license plate recognition system based on the 6000 series recorder and NVIP-2H-6732M/LPR camera allows you to open the gate/barrier according to vehicle database. Each recognition is saved as a snapshot of the licence plate image (which is automatically linked to a fragment of the recording), which facilitates the subsequent verification of entries. The configuration of the camera, database and the search for license plates is done from the recorder and web browser.

Configuration of cameras from the NVR

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

Dynamic change of stream parameters

The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording

Smart Playback

Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.

NMS Compatible

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.

The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.

ONVIF standard

The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

Sabotage

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

N-VID6 application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Video
IP Cameras

up to 8 channels at 5520 x 2400 resolution (video + audio)

Compression

H.264, H.265, H.265+, H.265 Smart

Monitor Output

main (split screen, full screen, sequence): 1 x HDMI (4K UltraHD), 1 x VGA (up to 2 monitors simultaneously)

spot: 1 x VGA (FullHD)

Dualstreaming Support

yes

Fisheye Support

yes, 6000 IP series cameras

using NVR, any web browser, N-VID6, N Control 6000

Audio
Audio Input/Output

1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA)

Recording
Recording Speed

240 fps (8 x 30 fps for 1280 x 720)

Stream Size

160 Mb/s in total from all cameras

Recording Mode

continuous, triggered by: manual, alarm input, motion detection, face recognition, intelligent image analysis functions

Prealarm/Postalarm

up to 5 s/up to 600 s

Display
Display Speed

240 fps (8 x 30 fps)

Playback
Playback Speed

240 fps (8 x 30 fps)

Recorded Data Search

by date/time, events, image analysis events, POS, motion in a defined area, related to face recognition, tags, license plate number

Backup
Backup Methods

USB port (HDD or Flash memory), network

Backup File Format

MP4, AVI, RPAS (player included)

Storage
Internal Storage

available mount: 1 x HDD 3.5” 10 TB SATA

Total Internal Capacity

10 TB

Alarm
Internal Alarm Input/Output

8/4 relay type

Camera Alarm Input/Output

supports IP camera’s alarm input/output

Motion Detection

supports camera’s motion detection

System Reaction to Alarm Events

buzzer, alarm output activation, recording activation, PTZ, e-mail with atatchment, Full Screen, PUSH message, voice prompt, snapshot

Intelligent image analysis
Supported Functions

Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Recognition, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, Analysis of Recognized Number Plate Numbers (LPR)

Database Capacity

10000 faces

50000 license plates

Other parameters

face recognition for 6 NOVUS 6000 series IP cameras with 'F' in the model name or 2 ONVIF cameras

Network
Network Interface

2 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s

Network Protocols Support

HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, IEEE 802.1X, PPPoE, SMTP, P2P, POS, HTML5

PC/MAC Software

NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC, NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000

Mobile applications

N-VID6 (iPhone, Android)

Number of Simultaneous Connections

up to 64 clients, up to 12 main streams or 32 substreams or 8 playback streams in total

Bandwidth

160 Mb/s in total to all client workstations

PTZ
PTZ Functions

pan/tilt/zoom, preset commands

Auxiliary Interfaces
USB Ports

2 x USB 2.0, 1 x USB 3.0

Operating system
Operating System

Linux

OSD

languages: Polish, English, others

Control

PC mouse (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss

Security

password protection, IP filtering, MAC filtering, ARP guard

Installation parameters
Dimensions (mm)

300 (W) x 44 (H) x 248 (D)

Weight

1.2 kg (without HDD)

Power Supply

12 VDC (100 ~ 240 VAC/12 VDC PSU in-set included)

Power Consumption

20 W (with 1 HDD)

Operating Temperature

-10°C ~ 50°C

The availability of individual functions (including image analysis) depends on the model of the cameras used, as well as the software version of the recorder and cameras.
In order to create face recognition system, please deploy NOVUS 6000 series IP cameras with "F" in the model name.
Presented display and playback speeds are achieved using dual-streaming. Detailed data on hard drives can be found in the compatibility table available in the DOWNLOADABLE FILES tab.
File name Description  
NVR-6408-H1F-II_EN_PL_short_v1.0.pdf
User manual
9.22 MB
CE_NVR_6408_H1_F_II-sig.pdf
Certificate
1.27 MB
Face recognition Rozpoznawanie twarzy.pdfUser manual

6.29 MB
NVR-6000_series_FULL_EN_PL_v3.2(1.4.4).pdfUser manual

34.21 MB
N_CONTROL_6000_1.2.3_EN_PL.pdfUser manual

8.28 MB
N_CONTROL_6000_PRO_PL_rozpoznawanie_twarzy.pdfUser manual

4.58 MB
VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdfUser manual

4.24 MB
NVR6000 rekomendacja bezpieczeństwa.pdfInstallation and Maintenance Manual

1.5 MB
N Control 6000 x64 Ver2.1.2.10830.exe.zipSoftware

430.94 MB
N Control 6000_ver2.1.2.10830.pkg_.zipSoftware

118.35 MB
NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_26.02.2024.xlsxCompatibility table

347.27 KB
NVR-6000_NHDR-6000_Lista_dyskow_HDD_compatible_list_2023.10.31.xlsCompatibility table

125 KB

See our channel on