• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s



Face recognition terminal with recording

KDH-ST6000P8-H1/F

Key features
  • 8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s
  • Recording speed up to 240 fps at 3840 x 2160
  • Intelligent image analysis
  • Face recognition terminal features:room occupancy control, people and vehicle counting statistics and charts (in conjunction with 6500 IP camera series), human temperature measurement (in conjunction with KDH-KZ6000FR-IP), face mask wearing control (in conjunction with KDH-KZ6000FR-IP), access control based on face recognition feature (in conjunction with KDH-KZ6000FR-IP), time attendance based on face recognition feature (in conjunction with KDH-KZ6000FR-IP)
Functions
Functionalities
SuperLive Plus application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Full camera configuration from NVR

The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

Dynamic change of stream parameters

The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265

The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.

Video
IP Cameras

up to 8 channels at 3840 x 2160 resolution (video + audio)

Maximum Supported Camera Resolution

3840 x 2160

Compression

H.264, H.264+, H.265

Monitor Output

main (split screen, full screen): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)

Dualstreaming Support

yes

Audio
Audio Input/Output

1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA)

Recording
Recording Speed

240 fps (8 x 30 fps for 3840 x 2160 and lower)

Stream Size

80 Mb/s in total from all cameras

Recording Mode

time-lapse, triggered by: manual, motion detection, perimeter intrusion detection, face recognition, intelligent image analysis functions

Prealarm/Postalarm

up to 5 s/up to 600 s

Display
Display Speed

240 fps (8 x 30 fps)

Playback
Playback Speed

240 fps (8 x 30 fps)

Recorded Data Search

by date/time, events

Backup
Backup Methods

USB port (HDD or Flash memory), network

Backup File Format

AVI, RPAS (player included)

Storage
Internal Storage

available mount: 1 x HDD 3.5” 10 TB SATA

Total Internal Capacity

10 TB

Alarm
Camera Alarm Input/Output

supports camera’s alarm input/output

Motion Detection

supports camera’s motion detection

System Reaction to Alarm Events

buzzer, recording activation, PTZ, e-mail with atatchment

Intelligent image analysis
Supported Functions

People Counting

Network
Network Interface

1 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s

8 x Ethernet PoE - RJ-45 interface, 10/100 Mbit/s

Network Protocols Support

HTTP, TCP/IP, IPv4, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, SMTP

ONVIF Protocol Support

Profile S (ONVIF 2.2 or higher)

PC/MAC Software

NMS, Internet Explorer, N Control 6000/N Control 6000

Mobile applications

SuperLive Plus (iPhone, Android)

Number of Simultaneous Connections

up to 2 clients, up to 5 main streams or 12 substreams or 8 playback streams in total

Bandwidth

80 Mb/s in total to all client workstations

PTZ
PTZ Functions

pan/tilt/zoom, preset commands

Auxiliary Interfaces
USB Ports

2 x USB 2.0,

Operating system
Operating System

Linux

Operation Mode

triplex

OSD

languages: Polish, English, others

Control

IR remote controller, PC mouse (in-set included), network

System Diagnostic

automatic control of: HDDs, network, camera connection loss

Security

password protection, IP filtering, MAC filtering

Installation parameters
Dimensions (mm)

300 (W) x 52 (H) x 248 (D)

Weight

1.16 kg (without HDD)

Power Supply

100 ~ 240 VAC

Power Consumption

20 W (with 1 HDD) + 100 W PoE

Operating Temperature

-10°C ~ 50°C

In order to take full advantage of the recorder capabilities, it is recommended to use NOVUS IP 6000 series cameras. The availability of individual functions depends on the model of cameras used as well as the software version of the recorder and cameras. Detailed data can be found in the compatibility table available in the DOWNLOADS tab
The list of compatible drives is available in the DOWNLOADS tab.
File name Description  
NVR-6000_v1.2.1.1_EN_PL.pdf
User manual
6.74 MB
CE_KADE_KDH_ST6000P8_H1_F-sig.pdf
Certificate
1.24 MB
TEMPERATURE MEASUREMENT INSTRUCTION_KDH-KZ6000-IP.pdf
User manual
8.08 MB
NVR-6000_series_FULL_EN_PL_v3.2(1.4.4).pdf
User manual
34.21 MB

See our channel on