• Cameras
    We recommend
  • Lenses
    We recommend
  • Recorders
    We recommend
  • Keyboards
    We recommend
  • Signal Transmission
    We recommend
  • Video intercoms
  • System solutions
  • Other
    We recommend
  • NMS
  • VENO
  • ANPR

Face detection



Classic IP Camera

NVIP-5C-6400/F

Archival product
Key features
  • Resolution: 5 MPX
  • two-way audio
  • D/N function - IR cut filter
  • Video content analysis
  • SD card support
  • WDR with double scan sensor
  • two-way audio
  • Min. Illumination from 0.003 lx
Functions
Functionalities
SuperLive Plus application

The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition

Full camera configuration from NVR

The 6000 series recorders, in conjunction with the 6000 (former 3000) series cameras, beyond the basic configuration of parameters such as contrast or brightness, allow for much more advanced interference with the camera settings. From the recorder interface, we are able to:
- set the corridor mode and turn 180/270 degrees
- set the focal length with the camera with the motorzoome lens
- set the image correction (BLC, HLC, WDR, etc.)
- set the operating mode (day / night / automatic)
- all video parameters (fps, resolution, bitrate etc.)

Face recognition

The function allows (using NVR 6000 series) to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after recognizing the face marked in the built-in database as "forbidden" or "wanted" face.

SD Card slot

The camera equipped with an SD card slot (up to 128GB) allows local recording of video material, so it is resistant to possible interference in the transmission of data between the camera and the recorder. Playback and export of saved material can be done from the level of the web browser.

NMS Compatible

NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

VCA Analysis

(Video Content Analysis) refers to advanced image analysis functions, such as the disappearance of an object from the scene or reading license plates, but also to other frequently used functions, such as line crossing or camera sabotage.

PoE

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.

ONVIF standard

The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

H.265+

Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.

Cross counting

A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
Application example:
- counting the number of visitors to the selected store depending on days / week

Multiloitering

The function allows to trigger a local alarm, send an e-mail, activate the relay after detecting the formation of people's communities from the observed scene. The function can be used in city monitoring.
Application example:
- monitoring public space, including markets, squares

Abandoned Object

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban

Object Disappearance

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits

Face detection

The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)

Intrusion

The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
Application example:
- perimeter protection of the object
- protection of strategically important objects

Sabotage

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)

Tripwire

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

Image
Image Sensor

5 MPX CMOS sensor 1/2.5” APTINA

Number of Effective Pixels

2592 (H) x 1944 (V)

Min. Illumination

0.03 lx/F1.2 - color mode,

0.003 lx/F1.2 - B/W mode

Electronic Shutter

auto/manual: 1/3 s ~ 1/100000 s

Digital Slow Shutter (DSS)

up to 1/3 s

Wide Dynamic Range (WDR)

yes (double scan sensor), 120dB

Digital Noise Reduction (DNR)

2D, 3D

Defog Function (F-DNR)

yes

Highlight Compensation (HLC)

yes

Back Light Compensation (BLC)

yes

Reduction of image flicker (Antiflicker)

yes

Lens
Compatible Mount Type

CS

Iris Mode

D

Day/Night
Switching Type

mechanical IR cut filter

Switching Mode

auto, manual, time

Switching Level Adjustment

yes

Switching Delay

2 ~ 120 s

Switching Schedule

yes

Network
Stream Resolution

2592 x 1944, 2592 x 1520, 2560 x 1440 (QHD), 2304 x 1296, 1920 x 1080 (Full HD), 1280 x 720 (HD), 640 x 480 (VGA), 320 x 240 (QVGA)

Frame Rate

30 fps for each resolution,

60 fps for 1920 x 1080 (Full HD)

Multistreaming Mode

3 streams

Video/Audio Compression

H.264, H.264+, H.265, H.265+, MJPEG/G.711

Number of Simultaneous Connections

max. 6

Bandwidth

60 Mb/s in total

Network Protocols Support

HTTP, TCP/IP, IPv4, IPv4/v6, UDP, HTTPS, Multicast, FTP, DHCP, DDNS, NTP, SNTP, RTSP, UPnP, SNMP, QoS, IEEE 802.1X, PPPoE, SMTP, SSL, ICMP, Unicast

ONVIF Protocol Support

Profile S/G

Camera Configuration

from Internet Explorer browser

languages: Polish, English, Russian, and others

Compatible Software

NMS, NVR-6000 Viewer

Mobile applications

SuperLive Plus (iPhone, Android)

Other functions
Privacy Zones

4 video mask type: single color or 1 video mask type: mosaic

Motion Detection

yes

Region of interest (ROI)

3

Video Content Analysis (VCA)

tamper, abandoned object, object disappearance, line cross, zone entrance, multi loiter, face detection, Scene Change, Video Blurred, Video Color Cast

Image Processing

180˚ image rotation, sharpening, mirror effect, corridor mode, vertical flip, horizontal flip

Prealarm/Postalarm

-/up to 120 s

System Reaction to Alarm Events

e-mail with attachment, saving file on FTP server, saving file on SD card, alarm output activation

Restoring default settings

via web browser, using reset button, via NMS IPTool software

Interfaces
Video Output

BNC, 1.0 Vp-p, 75 Ohm

Audio Input/Output

1 x Jack (3.5 mm)/1 x Jack (3.5 mm)

Alarm Input/Output

1 (NO/NC)/1 relay type

RS-485

yes

Network Interface

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Memory Card Slot

SD - capacity up to 128GB

Installation parameters
Dimensions (mm)

70 (W) x 60 (H) x 140 (L)

Weight

0.4 kg

Enclosure

aluminium, white

Power Supply

PoE, 12 VDC, 24 VAC

Surge protection

TVS 4000 V

Power Consumption

4 W

Operating Temperature

-20°C ~ 50°C

Humidity

max. 95%, relative (non-condensing)

Operating temperature with housing

-40°C ~ 50°C

File name Description  
NVIP_3000_series_FULL_EN_PL.pdf
User manual
4.34 MB
NVIP-5C-6400_F_SHORT_EN_PL_ver1.0.pdf
User manual
2.58 MB
CE_NVIP-5C-6400F_EN.pdf
Certificate
1.65 MB
Accessories Compatibility Tables_Tabele kompatybilnosci akcesoriow 26.08.2020.xlsxCompatibility table

5.54 MB
Compatibility_table_tabela_kompatyb._IP_Camera_NVR_2.09.2020.xlsxCompatibility table

217.86 KB
Face recognition Rozpoznawanie twarzy.pdfUser manual

6.29 MB
VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdfOthers

4.24 MB

See our channel on