Thanks to the use of a passive infrared detector, which was built into the front panel of the camera, we can eliminate false motion detections caused by eg:
- lights of passing cars
- shadow movements
- reflections from shiny surfaces
- leaves / trees movement in the wind
The principle of operation of the PIR sensor is based on the detection of heat changes in the detection zone, therefore the alarm is generated only when a human or other object that differs in temperature from the environment appears on the area.
Two way power function allows for using DC connector in camera (12V) as an output, when camera is powered by PoE. Maximum power output is 3W, so this solution is recommended mostly for active powered microphones (for cameras with audio input).
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
Image | |
---|---|
Image Sensor | 2 MPX CMOS sensor 1/2.7” SmartSens |
Number of Effective Pixels | 1920 (H) x 1080 (V) |
Min. Illumination | 0.1 lx/F1.2 - color mode, 0 lx (IR on) - B/W mode |
Electronic Shutter | auto/manual: 1/5 s ~ 1/20000 s |
Digital Slow Shutter (DSS) | up to 1/5 s |
Wide Dynamic Range (WDR) | yes |
Digital Noise Reduction (DNR) | 2D, 3D |
Defog Function (F-DNR) | yes |
Back Light Compensation (BLC) | yes |
Reduction of image flicker (Antiflicker) | yes |
Lens | |
Lens Type | fixed focal, f=2.8 mm/F2.2 |
Day/Night | |
Switching Type | mechanical IR cut filter |
Switching Mode | auto, manual, time |
Switching Delay | 1 ~ 36 s |
Visible Light Sensor | yes |
Network | |
Stream Resolution | 1920 x 1080 (Full HD), 640 x 480 (VGA) |
Frame Rate | 30 fps for 1920 x 1080 (Full HD), 20 fps for 640 x 480 (VGA) |
Multistreaming Mode | 2 streams |
Video/Audio Compression | H.264, H.265/G.711 |
Number of Simultaneous Connections | max. 10 |
Bandwidth | 40 Mb/s in total |
Network Protocols Support | HTTP, TCP/IP, IPv4, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, UPnP, SMTP |
ONVIF Protocol Support | Profile S/G |
Camera Configuration | from Internet Explorer browser languages: Polish, English, Russian, and others |
Compatible Software | NMS |
Other functions | |
Privacy Zones | 4 video mask type: single color |
Motion Detection | yes |
PIR detector | range up to 7 m |
Image Processing | 180˚ image rotation, vertical flip, horizontal flip |
Prealarm/Postalarm | up to 5 s/up to 30 s |
System Reaction to Alarm Events | e-mail with attachment, saving file on FTP server, saving file on SD card, saving in the cloud storage |
Restoring default settings | via web browser, using reset button |
IR LED | |
LED Number | 2 |
Range | 30 m |
Smart IR | yes (hardware support) |
Interfaces | |
Audio Input/Output | built-in microphone |
Network Interface | 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s |
Memory Card Slot | microSD - capacity up to 256GB |
Installation parameters | |
Dimensions (mm) | with bracket: 71 (Ф) x 150 (L) |
Weight | 0.4 kg |
Degree of Protection | IP 66 (details in the user’s manual) |
Enclosure | aluminium, white, fully cable managed wall mount bracket in-set included , IK10 impact rating |
Power Supply | PoE, 12 VDC |
Surge protection | TVS 4000 V |
Power Consumption | 1.5 W, 4 W (IR illuminator on) |
Operating Temperature | -30°C ~ 55°C |
Humidity | max. 95%, relative (non-condensing) |